Асептическая линия розлива ПЭТ-бутылок GEA Procomac 18 000 bph

Полная асептическая линия розлива ПЭТ-бутылок для большого разнообразия негазированных напитков и соков

SKU: 5032017

Производительность
GEA Procomac
Модель
APET 18 000
Дата выпуска
2004
Производительность
18 000 bph
Применение
Асептическое наполнение негазированных напитков
  • Aseptic Filling Block Promacon
  • Aseptic Filling Block Promacon
  • Aseptic Filling Block Promacon
  • Aseptic Filler Promacon Fillstar CM 70
  • Aseptic PET Bottle Filling Line - SIPA Blow molder
  • Aseptic PET Bottle Filling Line - Juice tube pasteurizer
  • Aseptic PET Bottle Filling Line Juice Tube Pasteurizer
  • Aseptic PET Bottle Filling Line - homogenizer
  • Aseptic PET Bottle Filling Line Homogenizer
  • Aseptic PET Bottle Filling Line Starmix
  • Aseptic PET Bottle Filling Line - Uniflux
  • Aseptic PET Bottle Filling Line - CIP 1
  • Aseptic PET Bottle Filling Line - CIP 2
  • Aseptic PET Bottle Filling Line Unidox
  • Aseptic PET Bottle Filling Line - Steril Cap W3
  • Aseptic PET Bottle Filling Line Fillstar CM 70
  • Aseptic PET Bottle Filling Line - conveyors
  • Aseptic PET Bottle Filling Line - Heuft inspector
  • Aseptic PET Bottle Filling Line - InterSleever
  • Aseptic PET Bottle Filling Line - Sleever Shrink tunnel
  • Aseptic PET Bottle Filling Line - Labeler SARCMI Opera 200 RF
  • Aseptic PET Bottle Filling Line - Divider
  • Aseptic PET Bottle Filling Line - Tray Shrink Packer Dimac Star 60
  • Blow molder SIPA SFR 16
  • Blow molder SIPA SFR 16
  • Preform kipping and feeding system
  • Promacon Convair 2000 Air conveyor
  • Aseptic Capper AROL
  • Aseptic Rinser Gripstar HS GX 1RB
  • SterilCap W3
  • Full bottle outfeed
  • Tube - in - tube pasteurizer
  • Sleeve labeller Intersleeve
  • Sleeve labeller Intersleeve
  • Sleeve labeller Intersleeve
  • Labeling machine SARCMI Opera 200 RF
  • Divider
  • Tray Shrink Packer Dimac Star 60
  • Mixer Starmix CM
  • Flasj Pasteurizer Unitherm HS 20

Aseptic PET Line PROCOMAC 18.000 bph year 2004 

Line was installed in 2004 – 2006 and it was in operation till 2015. Most of the line is still installed but not powered, some equipment is already dismantled and some components are missing.  This is suitable for aseptic filling of any still product: water, juices, high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm in PET bottles from 0.5 liters to 2.0 liters.

Aseptic filling of still products

The product is fed from a sterile buffer tank located on top of the filling carrousel and pushed by an overpressure of sterile nitrogen gas, through a linear product path. The flow meter determines the quantity of liquid according to the container and closes a membrane valve when the pre-set quantity is reached; a dual-speed design (slow speed mode is used at beginning and end of filling cycle) avoids foaming even with critical products.

The flow meter is the only moving part in contact with the product and the filling process does not allow contact between the filling nozzle and the bottle to avoid cross contamination. FX fillers are sterilized internally using steam to guarantee optimal hygiene. Complete clean room is over pressurized for aseptic requirements. 

The bottle ‘neck handling’ system allows handling of any container with the same neck finish. Changeover is performed without compromising sterility. CIP cup insertion and extraction for closed-loop CIP and SIP is completely automatic. Automatic product changeover can be achieved in less than 30 minutes with minimal product scraps.

Line Characteristics:

Made by                                 GEA Procomac

Made in year                          2004 - 2006

Capacity:                               18.000 bph @ 0.5 lt; 12.000 bph @ 1.5 lt; 9.000 bph @ 2.0 lt

Neck finish:                           Standard 38 mm

Products:                               Any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm

Availability:                             Immediately available 

Videos of this Procomac Aspetic Filling Bloc 

https://www.youtube.com/watch?v=EqOTXz2rWcs

https://www.youtube.com/watch?v=VoerzjVF3LM

https://www.youtube.com/watch?v=I6VGSC74VwM

For detailed list of equipment, please send us a proper inquire with your complete contacts.