Ilmakompressori Atelier Francois CE 6A 40 bar - 28.3 Nm3/min

Tuotenumero: 4462017

Valmistaja
Atelier Francois
Valmistajan tyyppimerkintä
CE 6A - 20G/104
Valmistusvuosi
2002
Kapasiteetti
FAD 1700 Nm3/h
Tuoteryhmä
PET Pullojen puhalluskoneen kompressori
FAD capacity
28.3 Nm3/min
Discharge pressure
40 bar
Compressor running speed
480 rpm
Electric motor
315 kW / 460 or 400 V / 60 and 50 Hz
Loaded hours
12 000
Total hours
36 000
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A
  • PET Compressor AF CE 6A

Air Compressor Atelier Francois 40 bar - 28.3 Nm3/min

This AF Compressor was built in 2002, and in use until 2015. It has been completely overhauled just before taking out of service. The equipment has been stored outdoors under tarps since dismantling.. This has caused some superficial rust that can be removed. Machine needs a normal maintenance prior to use including outside painting. Power belts are in good condition. The machine does not come with an air dryer, air filter or chiller. This air compressor has been connected to 460V / 60Hz power supply but it can run also with  400 V / 50 Hz. Due to resent refurbishment, pistons, shafts, electrical panel etc are in good conditions. Machine has only 36.000 running hours and 12.000 load hours. Due to outdoor warehousing, the machine needs proper service and some refurbishment