Machinery

KEG Filling Line Esau & Hueber Semiautomatic Party-KEG 5 liter 200 KEG/hour

SKU: 6452018

Good condition 5-liter aluminium beer KEG filling line, semiautomatic Esau Hueber with 4 filling valves. Complete line still installed.

Technical Details

  • Manufacturer Esau Hueber
  • Manufacturer's type SEMI - Fill Party-KEG 200
  • Made in year 2000
  • Capacity 100 - 200 kph
  • Application Beer filling in 5-liter KEG
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph
  • Party-KEG filling line for 5 liter aluminum KEG Esau Hueber 200 kph

KEG Filling Line Esau & Hueber Semiautomatic Party-KEG 5 liter 200 KEG/hour

The semiautomatic party-KEG-filler with 4 filling heads and capacity beginning from 100 up to 200 keg/h, made by Esau & Hueber GmbH in the year 2000. The KEG is placed manually onto the filler and lifted by two-hand operation. A sensor recognizes the arriving of the keg and starts automatically the filling process. The pre-air valve and the return-air will open. The keg gets purged with CO2 for approximately 5 seconds and the air opened simultaneously and the keg will be filled from bottom to top. A sensor probe – installed into the return-air channel – controls the filling process. A lamp indicates the finished filling process – the beer valve will be closed. The return-air valve stays open for a moment to relieve the filling pressure inside the keg to prevent any spilling when removing the keg from the filling head.

Utilities, beer, cleaning agents, gas load and a return gas supplied via valve and piping systems controlled by Esau Hueber control system. The design is made of stainless steel frame with a work desk, on which are arranged lift cylinders and pneumatic switches. The frame is equipped with support devices to accommodate all the remaining components. Bottling of beverages produced in the automatic mode. All other processes are performed manually. Equipment is good condition and ready to delivery.

Number of filling heads:         4

Serial number:                       7003

Product pressure:                  1,5 – 2,0 bar

Product temperature:             >4 – 5 0C

Voltage:                                 230 V, 50 Hz

Operating air:                        max. 7,0 bar

Pressure CO2:                       max. 8,0 bar

CIP / washing                         up to 120 0C / max. pressure 1,5 bar