Aseptic PET Bottle Filling Line GEA Procomac 18 000 bph
Complete aseptic PET bottle filling line for large variety non-carbonated drinks and juices
- GEA Procomac
- Manufacturer's type
- APET 18 000
- Made in year
- 18 000 bph
- Aseptic filling of non-carbonated drinks
Aseptic PET Line PROCOMAC 18.000 bph year 2004
Line was installed in 2004 – 2006 and it was in operation till 2015. Most of the line is still installed but not powered, some equipment is already dismantled and some components are missing. This is suitable for aseptic filling of any still product: water, juices, high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm in PET bottles from 0.5 liters to 2.0 liters.
Aseptic filling of still products
The product is fed from a sterile buffer tank located on top of the filling carrousel and pushed by an overpressure of sterile nitrogen gas, through a linear product path. The flow meter determines the quantity of liquid according to the container and closes a membrane valve when the pre-set quantity is reached; a dual-speed design (slow speed mode is used at beginning and end of filling cycle) avoids foaming even with critical products.
The flow meter is the only moving part in contact with the product and the filling process does not allow contact between the filling nozzle and the bottle to avoid cross contamination. FX fillers are sterilized internally using steam to guarantee optimal hygiene. Complete clean room is over pressurized for aseptic requirements.
The bottle ‘neck handling’ system allows handling of any container with the same neck finish. Changeover is performed without compromising sterility. CIP cup insertion and extraction for closed-loop CIP and SIP is completely automatic. Automatic product changeover can be achieved in less than 30 minutes with minimal product scraps.
Made by GEA Procomac
Made in year 2004 - 2006
Capacity: 18.000 bph @ 0.5 lt; 12.000 bph @ 1.5 lt; 9.000 bph @ 2.0 lt
Neck finish: Standard 38 mm
Products: Any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm
Availability: Immediately available
Videos of this Procomac Aspetic Filling Bloc
For detailed list of equipment, please send us a proper inquire with your complete contacts.